lemon-mirror:
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> Body Control Module Programming and Setup >> BCM Setup

BCM Setup

  1. To setup a new BCM, navigate to the Module Setup menu in Computer Integrating Systems on the scan tool, select Body Control Module.
  2. Run the BCM Setup, BPP Calibration and Program Key Fobs procedures.
  3. If the BCM fails to accept the program, perform the following steps:
    • Inspect all BCM connections.
    • Verify that the scan tool has the latest software version.
· About lemon-mirror