lemon-mirror:
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Engine Performance >> System >> Data Communications System >> Diagnostic Information and Procedures >> DTC B1016 >> Circuit/System Verification

Circuit/System Verification

  1. Verify DTC B1016 is not set.
    • If the DTC is set, program the control module.
  2. With a scan tool, clear the DTCs.
  3. Ignition OFF, remove the scan tool, open and close the drivers door.
  4. Wait 60 seconds, then verify DTC B1016 is not set.
    • If the DTC is set, replace the control module.
· About lemon-mirror