Disc Brake Component Specifications

WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotor LLT
Rotor Diameter	321.0 mm	12.64 in
Rotor Discard Thickness*	27.0 mm	1.063 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness (New)	30.0 mm	1.181 in
Front Brake Rotor L99, LS3
Rotor Diameter	355.0 mm	13.976 in
Rotor Discard Thickness*	30.0 mm	1.181 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness New	32.0 mm	1.259 in
Rear Brake Rotor LLT
Rotor Diameter	315.0 mm	12.40 in
Rotor Discard Thickness*	21.5 mm	0.846 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness New	23.0 mm	0.906 in
Rear Brake Rotor L99, LS3
Rotor Diameter	365.0 mm	14.37 in
Rotor Discard Thickness*	26.0 mm	1.023 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness New	28.0 mm	1.102 in
* All disc brake rotors have a minimum thickness dimension cast into them. Replace any rotor that does not meet the minimum thickness dimension.