Remote Control Door Lock Receiver Replacement

Fig 1: Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Instrument Panel (I/P) Plate Assembly Tip: Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
2	Remote Control Door Lock Receiver Bracket Screws (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 3 N.m (27 lb in)
3	Remote Control Door Lock Receiver Bracket
4	Remote Control Door Lock Receiver Procedure Release the retaining clips to remove the receiver from the bracket. Reprogram the receiver. Refer to Control Module References for programming and setup information.