lemon-mirror:
Home >> Chevrolet >> 2012 >> Equinox LS, FWD, Gas >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Primary Fuel Tank Module And O-Ring
    GM2239724Courtesy of GENERAL MOTORS COMPANY
  1. If replacing the fuel pump module only, install the primary fuel level sensor. Refer to Primary Fuel Level Sensor Replacement .
  2. Install a NEW O-ring (2) and the primary fuel tank module (1).
    3. Fig 2: Cam Lock Ring
    GM2239717Courtesy of GENERAL MOTORS COMPANY
  3. Using the J-45722  wrench, install the cam lock ring (1) by turning clockwise.
    4. Fig 3: Fuel And Evaporative Emission Lines And Electrical Connectors
    GM2239702Courtesy of GENERAL MOTORS COMPANY
  4. Connect the electrical connectors (1).
  5. Connect the fuel and evaporative emission lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
  6. Connect the crossover tube to the secondary fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Secondary (With Out) .
  7. Install the fuel tank. Refer to Fuel Tank Replacement (AWD) , Fuel Tank Replacement (FWD) .
· About lemon-mirror