lemon-mirror:
Home >> Chevrolet >> 2014 >> Spark EV >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure

Installation Procedure

  1. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
    2. Fig 1: EBCM And BPMV
    GM3226887Courtesy of GENERAL MOTORS COMPANY
  2. Install the EBCM (1) to the BPMV.
    3. Fig 2: Electronic Brake Control Module (EBCM) Bolts
    GM3226886Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the EBCM bolts (1) and tighten to 3 (27 lb in).
  4. Install the BPMV assembly. Refer to Brake Pressure Modulator Valve Replacement .
  5. Program the EBCM. Refer to Electronic Brake Control Module Programming and Setup .
· About lemon-mirror