lemon-mirror:
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wheel Alignment System) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Rear Suspension Lower Control Arm Inner Nut (Requires a NEW Bolt)
  • First Pass
90 N.m 66 lb ft
  • Final pass
60 degrees
Front Steering Linkage Tie Rod Jam Nut 60 N.m 44 lb ft
Rear Suspension Toe Adjust Link Inner Nut (Requires a NEW Bolt)
  • First Pass
90 N.m 66 lb ft
  • Final pass
60 degrees
Front Steering Knuckle Nut (at Strut Assembly) (Requires a NEW Bolt)
  • First Pass
85 N.m 63 lb ft
  • Final pass
60 degrees