lemon-mirror:
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
  1. Remove the electronic brake and traction control module with brake pressure modulator valve assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
  2. Remove the electronic brake control module (EBCM) bolts (1),
    Fig 1: Electronic Brake Control Module (EBCM) And Bolts
    GM2330143Courtesy of GENERAL MOTORS COMPANY
  3. Carefully separate the EBCM (1) from the brake pressure modulator valve (BPMV).
    Fig 2: EBCM And Brake Pressure Modulator Valve (BPMV)
    GM2330145Courtesy of GENERAL MOTORS COMPANY
  4. Clean the sealing surfaces of the EBCM and the brake pressure modulator valve with denatured alcohol and allow to dry.
    NOTE: Do not pry the components apart.
· About lemon-mirror