lemon-mirror:
Home >> Chevrolet >> 2015 >> Traverse LS, FWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Liftgate Calibration

Liftgate Calibration

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

  1. Ensure that the rotary switch on the overhead console is set to Enable.
  2. On the scan tool, select Body, select Liftgate Module, select Module Setup
  3. Perform the scan tool LGM Open/Close Test
· About lemon-mirror