| Air Cond Compressor Oil |
|
|
4.70 OZS. |
0.13 L |
PAG 46 |
|
S |
| Air Cond Refrigerant |
|
|
1.06 LBS. |
0.48 KG |
HFC-134a (R-134a) |
|
S |
| Automatic Transmission Fluid |
6.0L Eng |
Complete Trans System |
10.90 QTS. |
10.31 L |
Automatic Transmission Fluid DEXRON VI |
All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. |
S |
| Automatic Transmission Fluid |
6.0L Eng |
Overhaul |
9.20 QTS. |
8.7 L |
Automatic Transmission Fluid DEXRON VI |
All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. |
S |
| Automatic Transmission Fluid |
6.0L Eng |
Pan Removal & Filter Replacement |
6.70 QTS. |
6.34 L |
Automatic Transmission Fluid DEXRON VI |
All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. |
S |
| Brake Fluid |
|
|
N/A |
N/A |
Heavy Duty Brake Fluid DOT 4 plus, SAE J1704 or conforming to Chevrolet specification number HN 2456 |
|
S |
| Differential Gear Oil |
|
Rear Axle |
1.32 QTS. |
1.24 L |
Castrol SAF Carbon Modifier SAE 75W-85 API -GL5 Differential Oil |
|
S |
| Engine Coolant |
6.0L Eng |
|
11.01 QTS. |
10.41 L |
50/50 mixture of DEX-COOL and clean, drinkable water |
|
S |
| Engine Oil |
6.0L Eng |
w/Filter |
8.00 QTS. |
7.57 L |
API - SAE 5W-30 |
Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50.
If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
S |
| Fuel Tank |
|
|
18.80 GALS. |
71.16 L |
|
|
S |
| Windshield Washer Fluid |
|
|
N/A |
N/A |
Windshield Washer Fluid |
Follow the Manufacturer's Instructions for the mixture ratio.
Use only fluid that meets regional freeze protection requirements. |
S |