Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Exhaust Gasket |
| Exhaust Manifold Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Front Pipe Nut | 48 N.m (35 lb ft) |
| Exhaust Manifold | 33 N.m (24 lb ft) |
| Exhaust Manifold Heat Shield Nut | 6 N.m (53 lb in) |
| Exhaust Manifold Support Bracket | 50 N.m (37 lb ft) |
| Exhaust Rear Muffler Bolt | 48 N.m (35 lb ft) |
| Three-Way Catalytic Converter Bolt | 48 N.m (35 lb ft) |
| Three-Way Catalytic Converter Nut | 57 N.m (42 lb ft) |