lemon-mirror:
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Wheel Speed Sensor Bolt
    GM3227626Courtesy of GENERAL MOTORS COMPANY
  1. Install the wheel speed sensor to the steering knuckle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the wheel speed sensor bolt (1) and tighten to 8 N.m (71 lb in).
    3. Fig 2: Front Wheel Speed Sensor Harness Grommet
    GM3227624Courtesy of GENERAL MOTORS COMPANY
  3. Install the front wheel speed sensor harness grommet (1) to the strut bracket.
    4. Fig 3: Wheel Speed Sensor Harness Clips
    GM3223073Courtesy of GENERAL MOTORS COMPANY
  4. Install the wheel speed sensor harness clips (1) to the left front brake pipe.
    5. Fig 4: Wheel Speed Sensor Electrical Connector
    GM3227623Courtesy of GENERAL MOTORS COMPANY
  5. Connect the wheel speed sensor electrical connector (1) and install the connector to the front compartment side rail.
  6. Install the front compartment front splash shield. Refer to Front Compartment Splash Shield Replacement (Front)Front Compartment Splash Shield Replacement (Middle)Front Compartment Splash Shield Replacement (Rear) .
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. Perform the Diagnostic System Check - Vehicle .
· About lemon-mirror