lemon-mirror:
Home >> Chevrolet >> 2017 >> Express 2500 LS, 4.8L Eng VIN F >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing BCM Into Bracket
    GM923652Courtesy of GENERAL MOTORS COMPANY
  1. Install the BCM (1) into the bracket.

    Ensure the BCM (1) is engaged in the bracket, under the retaining tabs (2).

    2. Fig 2: Disconnecting Electrical Connectors From Body Control Module
    GM923655Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical connectors (2) to the BCM (1).
    3. Fig 3: Right Side Knee Bolster Trim Panel
    GM853308Courtesy of GENERAL MOTORS COMPANY
  3. Install the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
  4. If you replaced the BCM, program the module. Refer to Body Control Module Programming and Setup .
  5. Refer to Control Module References for programming and setup information.
· About lemon-mirror