Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Front Suspension Strut Shield Strap |
| Front Suspension Strut Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Front Link Bolt | |
|
60 N.m (44 lb ft) |
|
110 - 130 degrees |
| Front Lower Control Front Link Nut | |
|
50 N.m (37 lb ft) |
|
115 - 125 degrees |
| Front Lower Control Rear Link Bolt | |
|
60 N.m (44 lb ft) |
|
110 - 130 degrees |
| Front Lower Control Rear Link Nut | |
|
150 N.m (111 lb ft) |
|
Loosen 180 degrees |
|
55 N.m (41 lb ft) |
|
25 - 35 degrees |
| Front Stabilizer Shaft Insulator Clamp Nut | 37 N.m (27 lb ft) |
| Front Stabilizer Shaft Link Nut | 48 N.m (35 lb ft) |
| Front Suspension Strut Bolt at Steering Knuckle | |
| Front Suspension Strut Mount Nut | 55 N.m (41 lb ft) |
| Front Suspension Strut Nut at Steering Knuckle | |
|
100 N.m (74 lb ft) |
|
85 - 95 degrees |
| Front Wheel Bearing and Hub Assembly Bolt | |
|
100 N.m (74 lb ft) |
|
20 - 35 degrees |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Suspension Strut Nut at Front Suspension Strut Mount | 75 N.m (55 lb ft) |