Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter @ Exhaust Manifold Seal |
| Exhaust Manifold Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Air Conditioning Evaporator Hose Bracket Bolt (L86, L96) | 22 N.m (16 lb ft) |
| Catalytic Converter Fastener | 50 N.m (37 lb ft) |
| Exhaust Clamp | 30 N.m (22 lb ft) |
| Exhaust Manifold Fastener (L83, L86) | |
|
23 N.m (17 lb ft) |
|
27 N.m (10 lb ft) |
| Exhaust Manifold Fastener (L96) | |
|
15 N.m (11 lb ft) |
|
20 N.m (15 lb ft) |
| Exhaust Manifold Heat Shield Bolt (L96) | 10 N.m (89 lb in) |
| Exhaust Manifold Heat Shield Fastener-Left (L83, L86) | 10 N.m (89 lb in) |
| Exhaust Manifold Heat Shield Fastener-Right (L83, L86) | 10 N.m (89 lb in) |
| Exhaust Manifold Stud | 10 N.m (89 lb in) |
| Exhaust Muffler Clamp Fastener | 30 N.m (22 lb ft) |
| Front Body Exhaust Heat Shield Fastener | 9 N.m (80 lb in) |
| Heat Shield Nuts | 9 N.m (80 lb in) |
| Heater Inlet and Outlet Hose Bracket Bolt | 9 N.m (80 lb in) |
| U-Joint Yoke Retainer Bolt | 25 N.m (18 lb ft) |