lemon-mirror:
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component, or Spring Replacement >> Disassembly Procedure

Disassembly Procedure

  1. Remove Strut Assembly - Strut Assembly Removal and Installation 
    2. Fig 1: Compressing/Releasing Lower Part Of Shock Spring
    GM743246Courtesy of GENERAL MOTORS COMPANY
  2. Install the strut assembly (2) in the CH-45400  compressor (1).
    3. Fig 2: Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The front spring is sufficiently compressed when the strut moves freely.

  3. Turn the spring compressor forcing screw (1) until the front spring (2) is sufficiently compressed.
  4. Use a suitable tool to hold the strut rod and use the CH-42991  socket to remove the front suspension strut nut.
  5. Loosen the forcing screw (1) until the tension on the front spring (2) is released.
  6. Transfer or replace the strut assembly components as necessary.
· About lemon-mirror