Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Wheel Bearing and Hub Assembly Bolt | |
|
100 N.m (74 lb ft) |
|
65 - 75 degrees |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut at Front Lower Control Arm | 68 N.m (50 lb ft) |
| Front Lower Control Arm Ball Stud Nut at Steering Knuckle | |
|
50 N.m (37 lb ft) |
|
60 - 80 degrees |
| Front Lower Control Arm Front Bushing Nut | 75 N.m (55 lb ft) |
| Front Lower Control Arm Front Nut | 195 N.m (144 lb ft) |
| Front Lower Control Arm Rear Nut | 150 N.m (111 lb ft) |
| Front Stabilizer Shaft Insulator Clamp Bolt | |
|
30 N.m (22 lb ft) |
|
90 - 105 degrees |
| Front Stabilizer Shaft Link Nut at Front Stabilizer Shaft | 75 N.m (55 lb ft) |
| Front Stabilizer Shaft Link Nut at Front Strut | 80 N.m (59 lb ft) |
| Front Suspension Shock Absorber Upper Mounting Nut | 45 N.m (33 lb ft) |
| Front Suspension Strut Nut | 85 N.m (63 lb ft) |
| Steering Knuckle Nut | 195 N.m (144 lb ft) |