Window Motor Programming - Express Function: Notes
NOTE:
For convertible models, the express up functions of the driver or passenger power window will be disabled when the left rear or right rear power windows are not completely closed
A window motor that has not been normalized may no longer perform the express up functions or may not index up when the door is closed, this may occur during the following conditions:
- When a window motor has been disconnected or replaced
- When a door harness has been disconnected
When the battery has been disconnected or replaced, all window motors may no longer perform the express up functions
NOTE:
When DTC B3205 4B, B3210 4B, B3215 4B or B3220 4B are set, the following warnings will be displayed on the driver information center:
- Open, then Close Driver Window
- Open, then Close Passenger Window
These warnings will clear once the windows have been "Normalized" and the respective DTC will clear.