lemon-mirror:
Home >> Chevrolet >> 2021 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Programming And Setup) >> Repair Instructions >> K19 Suspension Control Module: Programming and Setup >> Replace and Program Control Module

Replace and Program Control Module

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs.
  4. With a scan tool, perform the suspension system calibration procedure, if applicable.
· About lemon-mirror