Single Use Threaded Fastener/Component Tightening Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Manifold Fastener | |
| First Pass: | 20 N.m (15 lb ft) |
| Second Pass: | 20 N.m (15 lb ft) |
| Final Pass: | 20 N.m (15 lb ft) |
| Warm Up Three-Way Catalytic Converter Nut | 58 N.m (43 lb ft) |