Reusable Threaded Fastener Tightening Specifications

NOTE: All fasteners listed in this table can be reused after removal.
Application	Specification
Application	Metric (English)
Steering Gear Bolt (Horizontal)
First Pass:	100 N.m (74 lb ft)
Final Pass:	45 - 60 degrees
Steering Gear Bolt (Vertical)	100 N.m (74 lb ft)
Steering Gear Heat Shield Bolt	10 N.m (89 lb in)
Steering Linkage Inner Tie Rod	100 N.m (74 lb ft)
Steering Linkage Outer Tie Rod Nut
First Pass:	35 N.m (26 lb ft)
Final Pass:	90 - 100 degrees