lemon-mirror:
Home >> Chrysler >> 1983 >> Imperial >> Repair and Diagnosis >> Engine Performance >> System >> Combustion Control Computer >> Diagnosis & Testing >> No-Start Checks

No-Start Checks

  1. Remove air cleaner. Disconnect coil secondary wire and connect it to ground. Crank engine and check for fuel flow at injectors. If flow is okay, check ignition system.
    CAUTION: Coil secondary wire must be grounded if not connected to cap while engine is being cranked. Otherwise, damage to computer may occur.
  2. If no fuel is seen, perform "In-Tank Pump Test". If fuel flow is minimal, perform "Fuel Pressure Test". If fuel flow is excessive or evidence of flooding is seen, perform EXCESSIVE FUEL FLOW  test.
· About lemon-mirror