Service Precautions

Disable air bag system before servicing any air bag system or steering column component. Failure to do this could result in accidental air bag deployment and possible personal injury. See DISABLING & ACTIVATING AIR BAG SYSTEM .
After repairs, turn ignition on from passenger side of vehicle in case of accidental air bag deployment. Ensure air bag warning light is working properly and system faults are not indicated. See SYSTEM OPERATION CHECK .
When placing a live air bag on a bench or other surface, always face air bag and trim cover up, away from surface. This will reduce motion of module if accidentally deployed.
After deployment, air bag surface may contain deposits of sodium hydroxide, which irritates skin, from gas generant combustion. Always wear safety glasses, rubber gloves and long-sleeved shirt during clean-up. Wash hands using mild soap and water.
Electrical sources should never be allowed near connector on back of air bag module.
Clockspring must be replaced whenever air bag deploys.