Manual Bleeding
- Fill master cylinder. Install clear vinyl bleed hose onto right rear bleed valve. Place other end of hose in clean transparent container.
- Partially fill container with clean brake fluid. Submerge end of hose in fluid. Open bleed valve 1-2 turns. Slowly depress brake pedal through its full travel.
- Close bleed valve. Release pedal. Pump pedal several times to push air toward wheel cylinders. Repeat procedure until flow of brake fluid is clear and free of bubbles. Proceed to next bleed valve of brake bleeding sequence. See BRAKELINE BLEEDING SEQUENCE table.
BRAKELINE BLEEDING SEQUENCE
| Application | Sequence |
|---|---|
| All Models | RR, LF, LR, RF |