Bleeding Brake System: Notes

NOTE: During bleeding procedure, ensure master cylinder fluid level remains close to FULL mark. Check master cylinder fluid level periodically while bleeding system. Add DOT 3 brake fluid as required.

Teves Mark 20 Anti-Lock Brake System (ABS) must be bled as 2 independent braking systems (ABS and base brake system). Always bleed base brake system first using manual bleeding or pressure bleeding procedure. See MANUAL BLEEDING or PRESSURE BLEEDING . ABS Hydraulic Control Unit (HCU) must be bled after base brake system. See BLEEDING HYDRAULIC CONTROL UNIT . Bleeding of HCU requires use of DRB-III scan tool. Always repeat base system bleeding procedure after bleeding HCU.