lemon-mirror:
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Instrument Panel) >> Cluster Bezel >> Installation

Cluster Bezel: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect headlamp switch connector. Place the cluster bezel into position and snap it into place firmly.
  2. Install the two screws over upper cluster bezel in instrument panel brow area and all remaining attaching screws.
  3. Install the items covering the bezel mounting screws.
  4. Install the one screw (Concorde/300M) to cluster bezel

    To service any instrument cluster component, the instrument cluster must be removed from the instrument panel. Use the following procedure:

  5. Tilt the steering column down into the highest position.
  6. Install the steering column shroud cover.
  7. Install the instrument panel left end cap.
  8. Connect the negative battery cable remote terminal to the remote battery post (Figure ).
· About lemon-mirror