Torque Specifications
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Belt Tensioner Pivot Bolt | ||
| 2.7L Engine | 21 (28) | |
| 3.5L Engine | 40 (54) | |
| Accessory Drive Belt Tensioner Pulley Lock Nut | 40 (54) | |
| Compressor Mounting Bolts | 21 (28) | |
| Compressor Shaft Bolt | 11-15 (15-20) | |
| Discharge Line-To-Condenser | 17 (23) | |
| Expansion Valve Lines | 17 (23) | |
| Expansion Valve-To-Evaporator | 17 (23) | |
| Receiver-Drier Fittings | 10 (14) | |
| Suction Line-To-Compressor Bolt | 17 (23) | |
| INCH Lbs. (N.m) | ||
| A/C Pressure Transducer | 53 (6.0) | |
| Blower Motor Screws | 19 (2.2) | |
| Condenser-To-Radiator Bolt | 45 (5.1) | |
| Door Actuator Screw | 19 (2.2) | |
| HVAC Housing Screws | 19 (2.2) | |
| HVAC Housing-To-Dash Panel Nuts | ||
| Engine Compartment Side | 44 (5.0) | |
| Passenger Compartment Side | 40 (4.5) | |