lemon-mirror:
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Instrument Cluster) >> Odometer >> Removal

Section 94 (Instrument Cluster): Odometer: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster must be removed for Odometer service. Refer to INSTRUMENT CLUSTER  :

On Intrepid, Concorde, and 300M  models, the odometer and PRNDL are one assembly retained by three screws.

  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove instrument cluster from vehicle. Refer to INSTRUMENT CLUSTER  .
  3. Remove five cluster back cover retaining screws and remove the cover.
  4. Unplug connectors from printed circuit board.
  5. Remove cluster mask/lens from instrument cluster. Refer to .
  6. Remove two screws to Vacuum Fluorescent (VF) display Odometer and remove from cluster.
· About lemon-mirror