lemon-mirror:
Home >> Chrysler >> 2000 >> Sebring Limited >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules - Except Coupe >> Programming >> Sentry Keys >> Customer Learn Method

Customer Learn Method

NOTE: If no sentry keys have been previously programmed, scan tool method must be used to program the first 2 keys into system. See SCAN TOOL METHOD . The following steps must be completed in proper order. SKIS will automatically exit CUSTOMER LEARN programming mode after each key is programmed, if 60 seconds is exceeded, or if 8 keys have already been programmed.
  1. Obtain 2 programmed sentry keys from owner. Ensure new sentry key blank is cut before proceeding. Insert one of the 2 valid sentry keys into ignition. Turn ignition on.
  2. After 3 seconds, but no greater than 15 seconds, turn ignition off. Remove key. Insert second valid sentry key. Turn ignition on.
  3. About 10 seconds after completion of step  2, VTSS LED indicator will flash and a single tone will be heard. This indicates system has entered customer learn programming mode.
  4. Turn ignition off. Remove valid sentry key. Within 50 seconds, insert blank sentry key and turn ignition on. After about 10 seconds, a single tone will be heard. VTSS LED indicator will stop flashing and stay on for about 3 seconds to indicate sentry key has been successfully programmed.
  5. SKIS will return to normal operation immediately following programming of each key. Repeat procedure for each additional sentry key to be programmed.
· About lemon-mirror