Memory System

NOTE: Memory applies to driver's seat only.

The memory switch is located on front outboard side of driver's seat. To program memory system for first driver, adjust driver's seat, outside mirrors and radio station to desired settings. Press and release memory switch "S" button. Within 5 seconds, press and release memory switch No. 1 button. To program memory system for second driver, repeat procedure and select memory switch No. 2 button. To recall desired memory settings, press and release appropriate memory switch button.

To recall memory positions using a programmed Remote Keyless Entry (RKE) transmitter, press UNLOCK button on transmitter. All memory settings will return to recalled position. To set stored positions in RKE, see SETTING MEMORY POSITIONS IN REMOTE KEYLESS ENTRY SYSTEM under PROGRAMMING. Memory recall using RKE can only be performed when vehicle transmission is in Park position. Module will abort RKE memory recall if seat is manually moved or vehicle is shifted from Park position while memory recall is in operation. RKE memory function can be disabled. See PROGRAMMING .