lemon-mirror:
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Air Conditioning Controls) >> Sun Sensor >> Removal

Sun Sensor: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN AN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
  1. Open the hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove the instrument panel top cover (Refer to REMOVAL ).
  3. Remove the two Sun Sensor mounting screws.
  4. Lift the sensor out of the instrument panel and disconnect the wiring.
  5. Remove the sensor from the vehicle.
· About lemon-mirror