lemon-mirror:
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Power Window Motor

Power Window Motor

  1. Remove door trim panel and sound pad. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION.
  2. Disconnect power window motor wire connector from door harness.
  3. Using 2 jumper wires, connect one to a battery (+) source and the other to a good ground (-).
  4. Connect the negative (-) jumper probe to one of the motor connector terminals.
  5. Momentarily touch the positive (+) jumper probe to the other motor connector terminal. When positive probe is connected the motor should rotate in one direction to either move window up or down. If window is all the way up or down the motor will grunt and the inner door panel will flex when actuated in that one direction.
  6. Reverse jumper probes at the motor connector terminals and window should now move in opposite direction. If the window does not move or grunt, replace the motor. If the window moved completely up or down, reverse the jumper probes and cycle window to the opposite position to verify full operation. If motor grunts and does not move with motor connected in both directions, verify that regulator is not binding.
· About lemon-mirror