lemon-mirror:
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Installation >> Installation - 2.4L

Installation - 2.4L

  1. Install the generator.
  2. Install the accessory drive belt, refer to the COOLING SYSTEM for proper procedures.
  3. Connect B+ terminal to generator.
  4. Install nut holding B+ wire terminal to back of generator.
  5. Connect the push-in field wire connector to back of generator.
  6. Install the EVAP Purge solenoid to its bracket.
  7. Install the Air Box.
  8. Connect the Inlet Air Temperature sensor.
  9. Connect battery negative cable.
· About lemon-mirror