lemon-mirror:
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Lock System >> Remote Keyless Entry Module >> Installation

Remote Keyless Entry Module: Installation

  1. Place module into position on BCM and snap the RKE Module into place.
  2. Attach the junction block/BCM and install the four retaining screws.
  3. Connect battery negative cable.

Install the BCM. Refer to ELECTRONIC CONTROL MODULES .

NOTE: The RKE transmitters must be reprogrammed to the new RKE module.
· About lemon-mirror