lemon-mirror:
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.5L) >> Engine Mounting >> Left Mount >> Removal

Left Mount: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise vehicle on hoist.
  2. Remove the isolator attaching nuts from top of the mounting bracket (Fig 1).
  3. Support the engine with a jack and a block of wood across the full width of the oil pan.
  4. Remove the lower attaching nuts from the bottom of the isolator to the frame (Fig 1).
    Fig 1: Identifying Left Engine Mounting
    G02709806Courtesy of DAIMLERCHRYSLER CORP.
  5. Raise engine carefully with jack enough to remove the isolator with heat shield from its mount.
· About lemon-mirror