lemon-mirror:
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L) >> Engine Mounting >> Rear Mount >> Installation

Rear Mount: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position isolator onto crossmember.
  2. Install bolts attaching isolator to crossmember and tighten to 33 N.m (250 in. lbs.) (Figure).
  3. Lower transaxle onto isolator.
  4. Install isolator nuts and tighten to 61 N.m (45 ft. lbs.) (Figure).
  5. Lower vehicle.
· About lemon-mirror