lemon-mirror:
Home >> Chrysler >> 2003 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Sentry Key Immobilizer Module >> Removal

Sentry Key Immobilizer Module: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Remove Lower Instrument Panel Cover. Refer to INSTRUMENT PANEL .
  3. Remove the steering column upper and lower shrouds. Refer to SHROUD - UPPER/LOWER .
  4. Disengage the steering column wire harness from the Sentry Key Immobilizer Module (SKIM) (Fig. Fig 1 ).
    Fig 1: Removing And Installing Sentry Key Immobilizer Module (SKIM)
    G02663531Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the two screws securing the SKIM to the top of the steering column (Fig. Fig 1 ).
  6. Rotate the SKIM and its mounting bracket upwards and then to the side away from the steering column to slide the SKIM antenna ring from around the ignition switch lock cylinder housing (Fig. Fig 1 ).
  7. Remove the SKIM from the vehicle.
· About lemon-mirror