lemon-mirror:
Home >> Chrysler >> 2003 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution System >> Power Outlet >> Installation

Power Outlet: Installation

  1. Position the mounting ring on the instrument panel and feed the wires through the ring. Index the cap and the mounting ring with the index tab at the 9 o'clock position to the key in the instrument panel. Install the ring.
  2. Connect the wires to the base. Orientate the base alignment rib at the 11 o'clock position to mate the groove in the mounting ring to the base.
  3. Push the base into the bezel until it locks in place.
  4. Check operation of outlet or element and install the 12 volt outlet cap.
· About lemon-mirror