lemon-mirror:
Home >> Chrysler >> 2003 >> Voyager Base, 3.3 R >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution System >> Integrated Power Module >> Installation

Integrated Power Module: Installation

  1. Snap the left side of the Integrated Power Module (IPM) housing in its mounting bracket and connect the various electrical connectors. Care must be taken that the Connector Positive Assurance (CPA) on the five-pin B+ connector is positively engaged to prevent generating a Diagnostic Trouble Code (DTC).
    Fig 1: Disconnecting IPM
    G03439226Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: IPM electrical connectors are color coded to ease location reference.
  2. Being certain no wires are stressed or pinched, rotate the IPM clockwise until secured in mounting bracket. An audible click may be heard.
  3. Install the battery in the vehicle.
  4. Install the battery thermal guard in the vehicle.
  5. Connect the negative and positive battery cables.
  6. Using a diagnostic scan tool, check for any stored diagnostic trouble codes and correct, check that all vehicle options are operational before returning the vehicle to service.
· About lemon-mirror