lemon-mirror:
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Transmission >> Clutch >> Pilot Bearing >> Installation

Pilot Bearing: Installation

  1. Lubricate new bearing with Mopar high temperature bearing grease or equivalent.
  2. Start new bearing into crankshaft by hand, then seat bearing with clutch alignment tool.
  3. Lightly scuff sand flywheel surface with 180 grit emery cloth. Then clean surface with wax and grease remover.
  4. Install clutch disc and clutch cover. See CLUTCH DISC  and CLUTCH COVER  .
  5. Install the transmission. See MANUAL - REMOVAL & INSTALLATION .
· About lemon-mirror