lemon-mirror:
Home >> Chrysler >> 2004 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

  1. Position accelerator pedal assembly on dash panel. Install retaining nuts. Tighten retaining nuts to 12 N.m (105 in. lbs.) torque.
  2. Place cable through slot in top of pedal shaft.
  3. While holding pedal lever, Push retainer clip forward in vehicle engaging it into the pedal lever.
  4. Hold the throttle body lever in the wide open position and install the throttle cable.
· About lemon-mirror