lemon-mirror:
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Body Control Module >> Removal

Body Control Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the lower instrument panel silencer.
  3. Remove the knee blocker airbag (Refer to AIR BAG RESTRAINT SYSTEMS ).
  4. Unclip the 72-way bulkhead connector from the Body Control Module (BCM) mounting assembly.
  5. Move bulkhead wiring aside.
  6. Disconnect the five wire connectors from the BCM.
  7. Remove the four screws holding the BCM to the bulkhead (Figure).
  8. Remove the BCM from the mounting bracket.
· About lemon-mirror