lemon-mirror:
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Link Rod >> Installation

Link Rod: Installation

  1. Install the drive unit end of the link rod on its mounting sphere by gently pushing straight on.
  2. Push the plastic retainer down to lock the mechanism in position.
  3. Install the D-pillar trim on the vehicle. Refer to D-PILLAR TRIM .
  4. Install the liftgate end of the link rod on its mounting sphere by gently pushing straight on.
  5. Push the plastic retainer down to lock the mechanism in position.
  6. Close the liftgate and check for proper power liftgate operation.
· About lemon-mirror