Suspension System: Notes
Independent front suspension consists of asymmetrical lower control arms, coil springs, gas-charged strut assemblies with urethane jounce bumpers, hubs and bearings, link-type stabilizer bar, lower ball joints and steering knuckles.
CAUTION:
DO NOT attempt to replace the ball joint grease fitting cap with a normal zirc fitting or fill the ball joint with grease. Damage to the grease seal can result.
There are no serviceable lubrication points on the front suspension. The ball joints are sealed for life and require no maintenance. The lower ball joints have special grease fitting caps that prevent normal grease gun attachment. This has been done to eliminate the possibility of overfilling and damaging the non-vented seal.