lemon-mirror:
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery HOLDDOWN >> Removal

Battery HOLDDOWN: Removal

Fig 1: Battery Hold Down Clamp
GC0015602Courtesy of DAIMLERCHRYSLER CORP.
  1. Verify that the ignition switch and all accessories are OFF.
  2. Remove the rear compartment floor, trim panel to gain access to the battery.
  3. Disconnect and isolate the battery negative cable.
  4. Remove the bolt from the battery hold down and remove the hold down.
· About lemon-mirror