Battery System: Battery: Removal
WARNING:
A SUITABLE PAIR OF HEAVY DUTY RUBBER GLOVES AND SAFETY GLASSES SHOULD BE WORN WHEN REMOVING OR SERVICING A BATTERY.
WARNING:
REMOVE METALLIC JEWELRY TO AVOID INJURY BY ACCIDENTAL ARCING OF BATTERY CURRENT.
- Make sure ignition switch is in OFF position and all accessories are turned OFF.
- Remove the rear compartment floor, trim panel to gain access to the battery.
- Disconnect the battery negative cable (2) from the battery terminal.
- Disconnect the battery positive cable (1) from the battery terminal.
- Unlatch the battery retention strap (4).
CAUTION: Use care when disconnecting the battery vent tube from the battery. The vent tube nipple is made of plastic and is easily damaged if not disconnected properly.
- Gently disconnect the battery vent tube from the battery nipple.
- Remove the battery hold down clamp and remove the battery from the vehicle.