lemon-mirror:
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Electronic Control Modules) >> Heated Seat Module >> Installation

Heated Seat Module: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heated seat module under the front seat.
  2. Connect the seat wire harness connector on the connector receptacle on the back of the heated seat module.
  3. Working under the driver front seat, install the heated seat module retaining screws.
  4. Re-position the driver seat.
· About lemon-mirror