Servo-Speed Control: Description
WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
A speed control servo is used only with 3.7L V-6 or 4.7L V-8 engines.
The speed control servo (4) is located in the engine compartment and is attached to the bottom of the PDC (Power Distribution Center) (1).
The servo unit consists of a solenoid valve body, and a vacuum chamber. The solenoid valve body contains three solenoids:
- Vacuum
- Vent
- Dump
The vacuum chamber contains a diaphragm with a cable attached to control the throttle linkage.