lemon-mirror:
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Accelerator Pedal >> Installation >> Notes

Accelerator Pedal: Installation: Notes

Fig 1: Identifying Nut
GC0032332Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the accelerator pedal harness connector.
  2. Slide the accelerator pedal into the bracket (1) and then onto the welded stud.
    Fig 2: Removing/Installing Accelerator Pedal-To-Floor Nut
    GC0032333Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the accelerator pedal lower nut (1). Tighten to 15 N.m (11 ft. lbs.).
  4. Install the plastic nut cover.
  5. Connect the negative battery cable.
· About lemon-mirror