Charging System: Generator: Installation: 3.5L

Fig 1: Locating Generator

Courtesy of DAIMLERCHRYSLER CORP.

1. Install generator.
2. Install the 2 lower mounting bolts. See Fig 1.
   Fig 2: Upper Mounting Bracket

   Courtesy of DAIMLERCHRYSLER CORP.
3. Install the upper mounting bracket. See Fig 2.
4. Tighten the 2 lower bolts first, tighten bolts to 54.2 N.m (40 ft. lbs.) then tighten the 2 upper bolts, tighten bolts to 28.2 N.m (20.8 ft. lbs.)
   Fig 3: Positive Battery Cable & Field Connector

   Courtesy of DAIMLERCHRYSLER CORP.
5. Connect the generator field circuit wiring connector. See Fig 3. Push the RED  locking tab to lock connector.
6. Install the B+ terminal nut and wire making sure the terminal is properly oriented with the anti-rotation tab. See Figure.
7. Tighten nut to 12.5 N.m (110 in. lbs.).
8. Install the generator drive belt, (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
9. Install the engine cover.
10. Connect battery negative cable.